← DAT Prep

How long is the DAT? Section times, breaks and pacing

The DAT takes 5 hours 15 minutes, according to the ADA. That's 4 hours 15 minutes of timed sections (Natural Sciences 90 minutes, Perceptual Ability 60, Reading Comprehension 60, Quantitative Reasoning 45) plus an optional 15-minute tutorial, 30-minute break and 15-minute survey. Arrive 30 minutes early, so plan for about 5 hours 45 minutes.

The DAT is the Dental Admission Test run by the American Dental Association (ADA) and given at Prometric test centers. Everything on this page about timing comes from the ADA's 2026 DAT Candidate Guide (updated August 4, 2026), checked November 17, 2026. Use the calculator to see your own seat time and pace, including with extra time if you're approved for it.

DAT length and pacing calculator

Tick the optional parts you plan to take and, if the ADA has approved extra time for you, choose it. You'll see your total seated time, how long each section runs and your average time per question. Add your appointment time to see when to arrive and roughly when you'll finish.

DAT length and pacing calculator

Choose your testing time and which optional parts you'll take. The result shows how long you'll be seated, how long each section runs and how many seconds you get per question.

Extra time only with an ADA-approved accommodation; your approval states the amount
From your Prometric confirmation; adds arrival and finish times
Optional parts
Seated time5 h 15 min
Timed sections4 h 15 min
With 30 min check-in5 h 45 min
PartTimeQuestionsPer question
Tutorial (optional)15 min––
Survey of the Natural Sciences1 h 30 min10054 sec
Perceptual Ability Test1 h9040 sec
Scheduled break (optional)30 min––
Reading Comprehension Test1 h501 min 12 sec
Quantitative Reasoning Test45 min401 min 8 sec
Post-test survey (optional)15 min––

Section lengths, the optional parts and the 30-minute arrival come from the ADA's 2026 DAT Candidate Guide. The ADA doesn't publish fixed extra-time levels, so +50% and +100% are example calculations; we apply extra time to the four timed sections only. For every section's start and end time, use the DAT test day timeline.

Last verified against the ADA DAT Candidate Guide: November 17, 2026.

Practice at DAT pace DAT practice questions with explanations for every section, so 40 seconds a PAT question feels normal. Free to start.
Create a free account

How long is each DAT section?

The four DAT sections add up to 4 h 15 min and 280 questions, always in the same order. The optional tutorial, break and survey bring the ADA's total to 5 h 15 min.

Source: ADA, DAT 2026 Candidate Guide, administration schedule (p. 16) and test specifications (pp. 4-8), checked November 17, 2026.
OrderPartQuestionsTime
1Tutorial (optional)–15 min
2Survey of the Natural Sciences100 (Biology 40, General Chemistry 30, Organic Chemistry 30)90 min
3Perceptual Ability Test90 (six subtests)60 min
4Scheduled break (optional)–30 min
5Reading Comprehension Test50 (three passages)60 min
6Quantitative Reasoning Test4045 min
7Post-test survey (optional)–15 min
Total280 questions4 h 15 min timed, 5 h 15 min in all

Biology, General Chemistry and Organic Chemistry sit inside one 90-minute section. The ADA's schedule gives that section a single time, so there's no separate clock for each science: how you split the 90 minutes is up to you. You'll sometimes see the DAT described as taking "4.5 hours", including in an infographic on the ADA's own DAT page. The candidate guide's schedule, which lists every part, is the more detailed source, so that's what we use here. For what each section covers, see our DAT format guide; this page sticks to the clock.

How much time do you get per DAT question?

On average, 54 seconds per Natural Sciences question, 40 seconds per Perceptual Ability question, 1 min 12 sec per Reading Comprehension question and about 1 min 8 sec per Quantitative Reasoning question. Across the whole test it works out to about 55 seconds a question.

Averages are section time divided by question count, rounded to the nearest second. The halfway check is our pacing marker, not an ADA rule.
SectionQuestionsTimeAverage per questionHalfway check
Survey of the Natural Sciences1001 h 30 min54 secQuestion 50 with 45 min left
Perceptual Ability Test901 h40 secQuestion 45 with 30 min left
Reading Comprehension Test501 h1 min 12 secQuestion 25 with 30 min left
Quantitative Reasoning Test4045 min1 min 8 secQuestion 20 with 22 min 30 sec left

The numbers hide how uneven the sections feel. Perceptual Ability is the tightest: 40 seconds for a cube-counting or paper-folding item leaves no room to second-guess, so drill the six subtests until your method is automatic (our PAT practice has timed sets). Reading Comprehension gives the most time per question, but that time includes reading three science passages, so about 20 minutes per passage, reading included, is the real budget.

In the Natural Sciences, 54 seconds is an average across three subjects. If you answer recall-style biology items quickly, you can bank that time for chemistry calculations, which you do by hand: the only calculator on the DAT is the on-screen one in Quantitative Reasoning. The ADA also notes that the timer pauses while a question loads, so a slow screen doesn't cost you time.

Does the DAT have a break?

Yes, one. The ADA offers an optional 30-minute scheduled break after the first two sections, Natural Sciences and Perceptual Ability. If you take it, the test resumes automatically after 30 minutes. It's the only scheduled break.

  • When it comes: with the tutorial, the break starts 2 h 45 min into your session. After it, Reading Comprehension and Quantitative Reasoning run back to back for 1 h 45 min.
  • Unscheduled breaks: any other break is unscheduled. The ADA says you may not use your phone, notes, food or drinks from your locker, or leave the test center during one, and test center staff report unscheduled breaks. The guide doesn't promise any extra time for them, so treat every minute away as coming out of your section.
  • Should you take it? Skipping saves 30 minutes but sends you into reading passages after 2.5 hours of testing with no pause. We suggest taking it; either way, decide in your full-length practice tests, not on the day.

How long is the DAT without breaks?

Without the optional break the DAT takes 4 h 45 min. If you also skip the tutorial and the survey, you're done after the 4 h 15 min of timed sections. The sections themselves never get shorter.

Our sums from the ADA's administration schedule.
What you takeSeated time
Everything: tutorial, break and survey5 h 15 min
No break (tutorial and survey)4 h 45 min
Break only (no tutorial or survey)4 h 45 min
Tutorial only4 h 30 min
Sections only4 h 15 min

Skipping the tutorial is reasonable if you've already practiced on a DAT-style interface; it only teaches navigation. The survey comes after the last section, so it changes when you leave but nothing about your test.

How long is the whole DAT test day?

Plan for about 5 h 45 min at the test center: the ADA requires you to report at least 30 minutes before your appointment, then up to 5 h 15 min seated. Add travel time and a buffer.

Being late is expensive. The ADA says that if you arrive more than 30 minutes after your scheduled start and are refused admission, you forfeit your full testing fee. Check-in includes two original forms of ID and identity capture, so use the full 30 minutes and don't cut it close.

Worked example 1: 8:00 a.m. appointment, everything taken. Arrive by 7:30 a.m.; with the tutorial, Natural Sciences and Perceptual Ability done, the break starts 2 h 45 min after your appointment time (around 10:45 a.m.), and you finish the survey about 1:15 p.m., 5 h 45 min after you walked in. Eat a real breakfast: lunch comes late.
Worked example 2: 1:30 p.m. appointment, no break. Arrive by 1:00 p.m., and without the break you're seated 4 h 45 min, finishing about 6:15 p.m.; a long afternoon with no pause is a reason to take the break or book a morning slot.

For a section-by-section schedule from your start time, plus what to bring and the ID rules, use our DAT test day timeline and checklist.

How long is the DAT with time and a half?

If the ADA approves 50% extra time and it applies to all four sections, the timed sections take 6 h 22 min 30 sec instead of 4 h 15 min. With the tutorial, break and survey, that's about 7 h 22 min 30 sec.

The ADA provides testing accommodations under the Americans with Disabilities Act for candidates with documented disabilities or medical conditions. It doesn't publish fixed extra-time levels; each request is reviewed and approved individually, and requested accommodations should match your documented functional limitations. The figures below are our arithmetic for two example amounts, applied to the four sections only. Your approval states what you actually get.

Our calculation from the ADA's standard section times. Tutorial, break and survey kept at standard length.
Testing timeNatural SciencesPATReadingQuantSections totalWith all optional parts
Standard1 h 30 min1 h1 h45 min4 h 15 min5 h 15 min
+50% (time and a half)2 h 15 min1 h 30 min1 h 30 min1 h 7 min 30 sec6 h 22 min 30 sec7 h 22 min 30 sec
+100% (double time)3 h2 h2 h1 h 30 min8 h 30 min9 h 30 min

With time and a half, Perceptual Ability goes from 40 to 60 seconds a question and Natural Sciences from 54 to 81. Practice at your approved pace so you don't rush out of habit. Timing of the request matters as much as the amount: you must request accommodations with each application, approval has to come before you schedule, and accommodations can't be added to an appointment you've already booked. Documentation includes an evaluation from the past five years. Questions go to the ADA at testingaccommodations@ADA.org.

How long is the DAT vs the MCAT?

The DAT is about two hours shorter. It has 4 h 15 min of timed sections against the MCAT's 6 h 15 min of content time, and 5 h 15 min in total against the MCAT's roughly 7 h 30 min seated.

Sources: ADA, DAT 2026 Candidate Guide; AAMC, What's on the MCAT Exam?, both checked November 17, 2026. Per-question averages are our calculation.
DATMCAT
Timed testing4 h 15 min6 h 15 min
Total in the seat5 h 15 min with all optional partsAbout 7 h 30 min (AAMC; check-in not included)
Questions280230
Average per questionAbout 55 secAbout 1 min 38 sec

Shorter doesn't mean more relaxed. The DAT gives you less than a minute per question on average, while the MCAT gives you more than a minute and a half. If you're choosing between them, our DAT vs MCAT comparison covers content, scoring and retakes.

How long are DAT scores good for?

The ADA doesn't set an expiration date for DAT scores in its 2026 Candidate Guide. Each dental school decides how recent your scores must be. Check the admissions pages of the schools on your list before you assume an older score still counts.

Two related timings come from the ADA. Results are reported electronically to the schools you chose within three to four weeks of your test date and posted to your DENTPIN account. If you've tested more than once, schools see your full testing history, not just your best score. Our DAT score release guide covers what happens after test day.

How long do you have to wait to retake the DAT?

60 days between attempts, with no more than four attempts in any 12-month period. The ADA's other retake rules:

  • Each attempt needs a new application and fee. An attempt counts once you're seated and have agreed to the confidentiality statement on screen.
  • From your third attempt on, you must apply for permission to test again, with proof of a recent dental school application.
  • After your fifth attempt, you can retest only once every 12 months.
  • Partial testing isn't allowed. If you leave a section untaken, the lowest possible score is reported for it.

Add the 60-day wait to three to four weeks for results, and a retake takes most of three months from your first test date. Our DAT test dates guide shows how to fit that around your application cycle.

Is the Canadian DAT the same length?

This page covers the ADA's DAT, the test used by U.S. dental schools. The Canadian DAT is a different test run by the Canadian Dental Association, so its timing isn't covered here. The ADA says its DAT is accepted by select dental schools in Canada and is given at Prometric centers in the U.S., its territories and some Canadian locations. If you're applying in Canada, the ADA asks you to confirm that your schools accept its DAT before you apply.

Frequently asked questions

The ADA lists the DAT's total administration time as 5 hours 15 minutes. That includes 4 hours 15 minutes of timed sections (Survey of the Natural Sciences 90 minutes, Perceptual Ability 60, Reading Comprehension 60, Quantitative Reasoning 45) plus an optional 15-minute tutorial, an optional 30-minute break and an optional 15-minute post-test survey.

Without the optional 30-minute break, the DAT takes 4 hours 45 minutes with the tutorial and survey, or 4 hours 15 minutes if you also skip the tutorial and survey. The four timed sections always add up to 4 hours 15 minutes; the optional parts don't count against them.

If the ADA approves 50% extra time and it applies to every section, the four sections take 6 hours 22 minutes 30 seconds instead of 4 hours 15 minutes, or about 7 hours 22 minutes with the tutorial, break and survey. The ADA decides accommodations case by case and doesn't publish fixed levels, so use the amount in your approval.

On average, 54 seconds per Survey of the Natural Sciences question (100 in 90 minutes), 40 seconds per Perceptual Ability question (90 in 60 minutes), 72 seconds per Reading Comprehension question (50 in 60 minutes) and about 68 seconds per Quantitative Reasoning question (40 in 45 minutes).

No. The DAT has 4 hours 15 minutes of timed sections and 5 hours 15 minutes in total. The AAMC lists the MCAT at 6 hours 15 minutes of content time and about 7 hours 30 minutes of seated time, not counting check-in. The MCAT is about two hours longer.

The ADA's 2026 Candidate Guide says to report to the test center at least 30 minutes before your scheduled appointment. If you arrive more than 30 minutes after your start time and are refused admission, you forfeit the full testing fee.

The ADA's 2026 Candidate Guide doesn't set an expiration date for DAT scores. Each dental school decides how recent your scores must be, so check the admissions pages of the schools you're applying to. When you've tested more than once, the ADA reports your full testing history.

60 days. The ADA allows at most four attempts in any 12-month period. From your third attempt on, you must apply for permission to test again with proof of a recent dental school application, and after a fifth attempt you can retest only once every 12 months.

Official sources

Related DAT guides

Build your DAT stamina before test day

DAT practice questions with explanations across Natural Sciences, PAT, Reading and Quant. Start with a free account.